Description
The Polex e-MISSION Control™ Mobile Dust Collector has been designed to suit a wide range of applications. These units are ideally suited to continuous operation since the filters are continuously cleaned while in operation.
Operating Principle
Polluted air enters through one or two inlets in the top casing and is directed through a baffle and then upwards through a set of cartridge filters. The larger dust particles drop out into the dust tray while the lighter and finer particles continue into the cartridge filters. The cleaned air then enters the clean-air chamber where an array of blow-tubes are positioned. Compressed air is ejected through a solenoid valve which travels through the blow tubes and into the cartridge filters. The compressed air causes the dust to fall off the filters and collect in the bin below. The cleaned air is then discharged to atmosphere through an activated carbon filter, or can be connected to discharge ductwork.
Filters
Antistatic Spun Bonded Polyester with PTFE membrane.
Construction & Finish
1.2 mm thick folded mild steel construction,Powdercoated inside and outside
Electrical
Electric motor starter with start/stop push buttons,automatic electronic timer for filter cleaning, hour meter and light for changing filters.
