DUST COLLECTORS and FUME EXTRACTORS
A new range of Dust Collectors from Australia's leaders in Dust and Fume Extraction
eCono Series
The eCono series of Automatic self cleaning Dust Collectors are the best value for money Dust Collectors on the market.
The eCono comes in 5 models and all have features that normally are only are available on much more expensive Dust Collectors. They are ideal for the collection of timber and other similar types of dust. All but 1 model has a Polex electric shaker motor that automatically cleans the filter bags every time the unit is turned off. Waste is deposited directly into either 2 - 4 ,180 L plastic bags or feed directly into a waste bin via a rotary valve. (eCono 6000 HRV)
The eCono features include
- Powerful high efficiency fan with either a 3.0, 4.0 or 7.5 kW motor
- Airflow's up to 3000 ,4000 or 6000 m3h @ 3000 + Pa.
- Huge filtration area from 20 - 30 m2 with either 15 or 25 filter bags
- Snap lock, quick fit / no leakage filter bags
- Filter bags are manufactured from top quality 550 g/m2 Polyester antistatic needle felt
- Engineered no leak quick release system on 2 - 4 x 180L waste collection bags
- Electric shaker motor on auto timer for self cleaning of filter bags
- Supplied with a control box with starter and isolator switch.
eCompact Series
The Polex eCompact Series is a powerful, feature packed engineered Dust Collector that is designed to fit into small plant rooms. It is perfect for the collection of dust and shavings and will automatically clean the filter bags every time the unit is switched off. The eCompact requires no compressed air connections to operate and is ideally suited for schools and colleges. The eCompacts are supplied in 2 sections that simply clamp together on site that makes installation in areas with restricted access much easier.
The eCompacts are manufactured from 1.6 mm galvanised steel then coated with a durable powder coated finish to prevent corrosion. The filters are tubular to allow easy dust release during the cleaning cycle that reduces any risk of blockages. The units filter bags are snap lock, quick fit / no leakage filter bags manufactured from top quality 550 g/m2 Polyester antistatic needle felt.
The dirty air inlets are flexible and can be at the sides or the rear of the unit. The eCompact’s clean air, high efficiency fan is located in an acoustic lined compartment in the top of the dust collector.
The dust that is collected is deposited directly into 1 or 2 sealed steel collection bins. The eCompact is available in 3 models (3000, 6000 or 9000) and can be customised for customer’s special requirements.
The eCompact series can be supplied with a Variable Speed Drive (optional). A VSD is a fantastic energy saving device that lowers & increases the power consumption of the fan motor when slide dampers (on the collection points) are closed and opened. It operates like an accelerator on a car. When less load is put on the dust collector, the fan motor will use much less power. This relates to big power savings. $$$
eMission Control
The new eMission Control portable dust collector does it all.
The engineers from Polex have designed the eMission Control to collect Dust, Fume, Smoke and Odours.
The eMission Control is an intelligent dust and fume collector that automatically and continuously self cleans its 2 filter cartridges with a reverse pulse action.
The eMission Control filtration system has 2 antistatic cellulose polyester filter catridges with a huge 36 m2 of filter area combined with a carbon filter and spark arrester.
The unit has a powerful high efficiency fan with a 2.2 kW motor that produces suction of up to 2200 m3h @ 2500 Pa . This makes the eMission Control powerful enough to run 2 x 3.0 m fume arms simultaneously.
Construction is from galvanised steel then coated with a durable powder coated finish to prevent corrosion. The unit is mounted on 4 quality caster wheels to ensure the unit glides from position to position.
All this in a unit that can fit through a standard doorway.
MDC S Series
The Polex MDC S series is a fully automatic, self cleaning dust collector. The MDC S is available with airflows from 6000 to 36,000 m3/h with larger capacities available on request.
It has been designed in Australia by the experienced engineers at Polex Environmental Engineering to suit Australian industry requirements for a dust collector that requires the minimum amount of labour and energy to operate.
Every time the Polex MDC S is turned off the unit will automatically go into a cleaning cycle. The unit is fitted with 1 to 3 Polex Shaker / Vibration motors that clean the dust collector's filters bags ready for the unit to operate at maximum efficiency the next time it is turned on.
Most Australian factories stop at morning tea and lunch time so the unit cleans itself 3 times per day. The unit's filter bags are snap lock, quick fit/ no leakage filter bags manufactured from top quality 550 g/m2 Polyester antistatic needle felt.
The MDC S is supplied standard with a Rotary Discharge Valve (or airlock) that deposits the factories collected waste directly into a 3 m3 bin. There is no need to turn the dust collector off and stop the factory working when the bin is being emptied.
Once the bin is full, the operator simply switches the Rotary Valve off and wheels it to the truck to empty. After the bin is empty the operator then replaces the bin and turns the Rotary Valve back on. A safety feature of the unit to prevent blockages is if the valve is not switched back on the unit will shut down after 30 minutes.
The MDC S is supplied standard with a High Efficiency Fan that produces around 25% more air than conventional Fans and saves on energy costs. The dust collector is designed to run under negative pressure so that no material passes through the fan impeller. This totally eliminates any chance of damage or of a blockage to the fan. The Dust Collector is manufactured from 1.6 mm galvanised steel folded panels for strength and corrosion resistance. On request, MDC S can be painted to customer's requirements to match the colour of the building etc.
The Variable Speed Drive (optional ) is a fantastic energy saving device that lowers & increases the power consumption of the fan motor when slide dampers (on the wood working machines) are closed & opened. It operates like an accelerator on a car. When less load is put on the dust collector, the fan motor will use much less power. This relates to big power savings. $$$
MDC P Series
The Polex MDC P series is an intelligent dust collector that automatically and continuously self cleans its many filter bags with a reverse pulse action. The MDC P is available with airflow from 6000 to 210,000 m3/h.
It has been designed in Australia by the experienced engineers at Polex Environmental Engineering to suit Australian industry requirements for a dust collector that requires the minimum amount of labour and energy to operate. Since the unit continuously self cleans its bags it operates at maximum efficiency 100% of the time. The MDC P is ideal for high dust loads of fine material or in cases where there is a very long duct run that will reduce a dust collector's efficiency.
The unit's many filter bags are snap lock, quick fit / no leakage filter bags manufactured from top quality 550 g/m2 Polyester antistatic needle felt. All filter bags are fitted on galvanised steel wire cages.
The MDC P is supplied standard with a Rotary Discharge Valve (or airlock) that deposits the factory's collected waste directly into a 3 m3 bin. There is no need to turn the dust collector off and stop the factory working when the bin is being emptied.
Once the bin is full, the operator simply switches the Rotary Valve off and wheels it to the truck to empty. After the bin is empty the operator then replaces the bin and turns the Rotary Valve back on. A safety feature of the unit to prevent blockages is if the valve is not switched back on the unit will shut down after 30 mins.
The MDC P is supplied standard with a High Efficiency Fan that produces around 25% more air than conventional Fans and saves on energy costs. The dust collector is designed to run under negative pressure so that no material passes through the fan impeller. This totally eliminates any chance of damage or of a blockage to the fan. The Dust Collector is manufactured from 1.6mm galvanised steel folded panels for strength and corrosion resistance. On request, the MDC S can be painted to customer requirements to match the colour of a building etc.
The Variable Speed Drive (optional) is a fantastic energy saving device that lowers and increases the power consumption of the fan motor when slide dampers (on the wood working machines) are closed and opened. It operates like an accelerator on a car. When less load is put on the dust collector, the fan motor will use much less power. This relates to big power savings. $$$
MDC PC Series
The Polex MDC PC series is an intelligent dust collector that automatically and continuously self cleans its filter cartridges with a reverse pulse action. The MDC PC is available with airflow from 6000 to 210,000 m3/h.
It has been designed in Australia by the experienced engineers at Polex Environmental Engineering to suit Australian industry requirements for a dust collector that requires the minimum amount of labour and energy to operate.
As the unit continuously self cleans its cartridges it operates at maximum efficiency 100% of the time. The MDC PC ideal for high dust loads of fine material, fumes and smoke such as from laser and plasma cutters or in cases where there is a very long duct run that will reduce a dust collector’s efficiency.
The unit's filters are supplied standard with antistatic cellulose polyester filter cartridges but there are many other types of filter media available depending on the application.
The MDC PC is supplied standard with a Rotary Discharge Valve (or airlock) that deposits the factory's collected waste directly into a 3 m3 bin. There is no need to turn the dust collector off and stop the factory working when the bin is being emptied.
Once the bin is full, the operator simply switches the Rotary Valve off and wheels it to the truck to empty. After the bin is empty the operator then replaces the bin and turns the Rotary Valve back on. A safety feature of the unit to prevent blockages is if the valve is not switched back on the unit will shut down after 30 mins.
The MDC P is supplied standard with a High Efficiency Fan that produces around 25% more air than conventional Fans and saves on energy costs. The dust collector is designed to run under negative pressure so that no material passes through the fan impeller. This totally eliminates any chance of damage or of a blockage to the fan. The Dust Collector is manufactured from 1.6mm galvanised steel folded panels for strength and corrosion resistance. On request, the MDC S can be painted to customer’s requirements to match the colour of the building etc.
The Variable Speed Drive (optional) is a fantastic energy saving device that lowers & increases the power consumption of the fan motor when slide dampers (on the wood working machines) are closed and opened. It operates like an accelerator on a car. When less load is put on the dust collector, the fan motor will use much less power. This relates to big power savings. $$$
Vehicle Exhaust Hose Reels
The Polex vehicle exhaust hose reels are designed to be installed in garages, vehicle maintenance workshops, fire stations, military bases etc for the extraction of vehicle exhaust fumes.
The reel is designed to be fitted on the wall or the ceiling to help keep the workshop floor uncluttered. There is a control pendent at the operators level operating an electric motor that lowers and raises the hose and a locking mechanism stops the hose at the desired height.
They can be used with a single fan or as part of a centralised extraction system.
The vehicle exhaust hose reels are supplied with 8 metres of either 100 mm or 150 mm diameter high temperature crush resistant flexible hose. A selection of nozzles are available (sold separately).
HVAC System
The Compact High Vacuum Dust Collector series is specifically suited to applications where high suction is required, such as from hand held power tools or centralised vacuum systems.
These units are ideally suited to continuous operation since the filters are continuously cleaned while in operation. The tubular filters permit blockage-free dust release. Polluted air enters through an inlet in the main body and is directed upwards through the array of tubular filters. The larger dust particles drop out into the hopper while the lighter and finer particles continue into the array of filters. The cleaned air then enters the clean-air chamber where an array of blow-tubes are positioned. The tubes blast compressed air into the filters to help release the dust. The cleaned air is then discharged to atmosphere or through discharge ductwork.
Compressed air is ejected through a solenoid valve which travels through the filters. The air causes the dust to fall off the filters and collect in the bin below. Tubular Polyester needle felt 550 g/m2.
Construction is from Bolt-together 1.6 mm and 3 mm thick Galvanised sheetmetal panels.
The unit is supplied with an electric motor starter with start/stop push buttons automatic electronic timer for filter cleaning.
Wet Spray Booths
The Polex range of Dry Spray booths are constructed from bolt-together modular Galvanised sheetmetal panels. Dry paper filter media is fitted into the filter wall. The media is suitable to filter many paint and adhesive products. Spray booths are supplied complete with axial extraction fans with Ex'e' rated motors.
Dry Spray Booths
The Polex range of Dry Spray booths are constructed from bolt-together modular Galvanised sheetmetal panels. Dry paper filter media is fitted into the filter wall. The media is suitable to filter many paint and adhesive products. Spray booths are supplied complete with axial extraction fans with Ex'e' rated motors.